1973 EXT 440 Specifications
Engine
Model: T7A440RX-1 Kawasaki
Cylinders: 2
Displacement: 436cc
Bore: 68mm
Stroke: 60mm
Horsepower: 70 +
Compression Ratio: 7.5:1 Effective
Peak HP R.P.M.: 8500
Piston Clearance: 0.0048 inch max
Ring End Gap: 0.008 - 0.014 inch
Timing: Timing Mark on Crankcase
Ignition Type: CD
Lighting Coil Voltage/Wattage: 12 Volt/100 Watt
Spark Plug: NGK B10EV
Plug Gap: 0.012 - 0.016 inch
Carburetor: Mikuni VM-40
Fuel Mixture Ratio: 20:1
Cylinder Head Torque: 16 ft. lbs.
Crankcase Torque: 16 ft. lbs.
Flywheel Torque: 60 ft. lbs.
Maximum Engine Operating Temp: 425 Degrees
Drive Pulley
Model: Kawasaki & Arctic
Kawasaki Spring Tension: 45 lbs per inch
Arctic Spring Tension: 64 lbs per inch
Engagement speed: 6500 R.P.M. Withe Gear Reduction
Drive Belt Width: 1 1/4 inch
Outside Drive Belt Circumference: 46 7/8 inches (+ /- 3/16
inch)
Driven Pulley
Model: Comet
Spring Color: red
Drive/Driven Pulley
Center to Center Distance: 11 3/8 inches
Offset: .320 inch
Gearing
With Arctic Drive Pulley: 22T/35T
With Kawasaki Drive Pulley: 35T/20T
Chain: 60 Pitch
Chassis
Chassis Material: Aluminum
Belly Pan Material: Fiberglass
Hood Material: Fiberglass
Length W/Skis: 94 inches
Height: 33 inches
Overall Width: 33 1/2 inches
Track Width: 15 inches
Track Lenght on Ground: 30 inches
Fuel Capacity: 4 1/2 gallons
Chaincase Capacity: 8 ounces
Weight: 285 pounds
Carburetor Specifications
Main Jet: 380
Air Jet: -
Jet Needle: 7DH2-3
Needle Jet: AA-5
Slide: 1.5
Pilot Jet: 30
Bypass Hole: 1.4
Pilot Outlet: 0.8
Air Screw: 1.0
Inlet Seat: 1.5
Starter Jet: 1.5
Fuel Level: 37.0
Bypass Pitch: 4.5
Pump: DF52
Back to the main EXT page